Installation procedure

 

 

 

 

 

 

 

 

DIALOGYS MPF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Author

Dialogys Team

Date

07/04/04

 


Introduction

 

Installation is performed in two stages:

 

Ø      Installation of the three software applications required for Dialogys MPF to operate. Set-up programs for these three software applications are on the DIALOGYS 0 CD-Rom. These software applications only need to be installed once; before Dialogys MPF is used for the first time.

Ø      Installing the Dialogys MPF application. It is installed using the Dialogys MPF CD-Roms. Here is the list of all the Dialogys CD-Roms available:

 

Name of CD-Rom

Content

DIALOGYS 0

-         Software set-up programs required

-         Application set-up program

-         Application set-up program in Romanian

DIALOGYS 1

-         PR and TM data set-up program

-         PR and TM data set-up program in Romanian

DIALOGYS 2 (in every language)

-         MR and NT data set-up program

DIALOGYS 3 (not available for Romania)

-         MR 2 data set-up program

DIALOGYS PR 001

-         Set-up program for discontinued range data

DIALOGYS PR 002

-         Set-up program for discontinued range data

 

Note:

Every Romanian set-up CD-Rom will have the extension " _RO". For example on the DIALOGYS 0 CD-Rom, the standard application is named "Install", however, the Romanian application will be named "Install_RO"

The following procedure has been written for the standard set-up program.

 

Warnings

 

·       At least 100 Mega bytes must be available on the hard disk for minimum installation and 1.5 Giga bytes for complete installation.

·       Before beginning the installation procedure, exit all other applications.

·       The software must be installed using the following procedure:

-       Acrobat Reader 5

-       Java Run Time Standard Edition v1.3.1_04

-       Quick Time 6

-       Restart the work station

-       Dialogys MPF

-       Restart the work station

·       Warning: Quick Time must be installed with the  «Custom» (customise) (installation is described in the «Installation de Quick Time»  (Installing Quick Time) section.

·       If an installation fails, it will be necessary to «désinstaller» (uninstall) the parts of the program which have been copied onto your hard disk. For information on doing this, refer to the section on « Désinstallation » (unistalling) at the end of the document.

·       Basic configuration: Pentium II 150 Mhz, Ram 32 Megabytes, ,Windows 95, 800x600 screen resolution (1024x768 recommended), Netscape Communicator 4.06 or Internet Explorer 4.0.

 

 

Checking the software applications to be installed

 

To find out which software applications need to be installed on your work station, carry out the following procedure:

1.      Insert the DIALOGYS 0 CD-ROM into an available CD-Rom drive

2.      Open Windows explorer

 

Window

Action

In the DIALOGYS 0 CD-Rom root file

Double click on the icon: Install

In the Choix de langue d'installation (Installation language selection) window

Select the language required

Click on the [OK] button

In the Introduction (Introduction) window

Click on the [Suivant] (Next) button

In the Vérification des éléments indispensables au bon fonctionnement de Dialogys (Check Dialogys functional applications) window

Check that all the following applications have a green tick:

1.      1.33 virtual Java machine

2.      QuickTimeSoftware

3.      Acrobat software

4.      QuickTime for Java

If they are all ticked, all the required software applications are correctly installed and you can proceed to the installation of Dialogys MPF. To do this, click on the [Suivant](Next)button. The MPF installation procedure is described further on.

If they are not all ticked, it is advisable to exit the MPF start-up program and install the missing software applications. To do this, click on the [Annuler] (Cancel) button

 

 

Stage 1: Installing Acrobat Reader

 

To start installing Acrobat Reader 5, insert the DIALOGYS 0 CD-Rom into your computer's CD-Rom drive, open Windows Explorer and carry out the following procedure:

 

Window

Action

In the directory

x*:\Soft\Choix_langue\ AcrobatReader on DIALOGYS 0 CD-Rom

French

Double click on the icon: rs51fre.exe

English

Double click on the icon: ar51eng.exe

Spanish

Double click on the icon: ar51esl.exe

Portuguese

Double click on the icon: ar51por.exe

In the Installation d’Acrobat Reader 5.1 (Install Acrobat Reader 5.1) window

Click on the [Suivant] (next) button

In the Sélection du dossier d’installation (Select installation file window) window

Select the directory in which the application will be installed

Click on the [Suivant] (Next) button

In the Information (information) window

Click on the [OK] button

            x* : the CD drive can be d:\, e:\, etc.

 

Stage 2: Installing Java

 

The Java 2 operating environment start-up program Edition, v1.3.1_04 is also on the DIALOGYS 0 CD-Rom. From Windows Explorer, carry out the following procedure:

 

Window

Action

In the directory

x*:\Soft\Choix_lang\JavaRunTime on DIALOGYS 0 CD-Rom

Double click on the icon: j2re-131.exe

In the Contrat de licence logiciel (Software licence contract) window

Click on the [Oui] (Yes) button

In the Sélection du dossier d`installation (Select installation file) window

Modify the installation file if required by clicking on the [Parcourir] (Browse) button

Click on the [Suivant](Next) button

In the Sélectionnez les navigateurs (Select navigators) window

Click on the [Next] button and the selection of navigators will then appear

Java has finished installing. The start-up program closes automatically after installation.

It is ESSENTIAL to restart your work station even if the start-up program does not request you to

Restart the work station

            x* : the CD drive can be d:\, e:\, etc.

 

Stage 3: Installing Quick Time

 

The Quick Time 6 start-up program is also on the DIALOGYS 0.CD-Rom From Windows Explorer carry out the following procedure:

 

Window

Action

In the directory

x* :\Soft\Choix_langue\Quick Time on CD-Rom DIALOGYS 0

Double click on the icon: QuickTimeInstaller.exe

In the Installation de Quick Time 6 (Install Quick Time 6) window

Click on the [Next] button

In the Bienvenue (Home) window

Click on the [Next] button

In the Accord de Licence de logiciel (Software Licence agreement) window

Click on the [Accepter] (Accept) button

In the Choisissez l’emplacement destinataire (Select save location) window

Modify the location if required, by clicking on the [Parcourir] (Browse) button

Click on the [Next] button

In the Choix du type d’installation (Select installation type) window

Select the required option [Personnalisée] (Personalised) then click on the [Next] button

In the Sélectionnez les composants (Select components) window

Click on the [Tout sélectionner] (Select all) button then [Next]

In the Sélectionnez le dossier de l’application (Select application file) window

Click on the [Suivant] (Next) button

In the Enregistrement (Save) window

Click on the [Suivant] (Next) button

In the Réglages Quick Time (Quick Time Settings) window

Click on the small cross at the top right-hand corner of the window to close the window

The configuration can then be performed using the Quick Time control panel

In the Finish window

Select the "yes, I want to display the file, open Quick Time" and "yes, I want to run Quick Time Player "options

Click on the [Fermer] (Close) button

La fenêtre d'explorateur de Quick Time (The Quick Time explorer window):  "C:\WINDOWS\Start Menu\Programs\Quick Time" opens automatically

Click on the small cross at the top right-hand corner of the window to close the window

It is ESSENTIAL to restart the workstation.

Restart the work station

            x* : the CD drive can be d:\, e:\, etc.

 

Stage 4: Installing Dialogys MPF

 

The following procedure uses the DIALOGYS 0, DIALOGYS 1 and DIALOGYS 2 CD-Roms to install the Dialogys MPF application. The DIALOGYS 1 and DIALOGYS 2 data can be installed subsequently but at least one of these two CD-Roms. must be installed.

 

1.      Insert the DIALOGYS 0 CD-Rom into the CD-Rom drive

2.      Open Windows explorer

3.      Carry out the following procedure:

 

Window

Action

In the DIALOGYS 0 CD-Rom root file

Double click on the icon: Install

On the start-up program home page

Select the language required

Click on the [Ok] button

In the Dialogys - Choix du pays (Dialogys - Country selection) window

Select the country

Click on the [Suivant] (Next) button

In the Dialogys - Choix de langue (Dialogys - Language selection) window

Select the country language

Click on the [Next] button

In the Dialogys - Sélection du dossier d`installation (Dialogys - Select installation file) window

To change the installation file, click on the [Parcourir] (Browse) button and select the new installation file

Click on the [Suivant] (Next) button

Installation of Dialogys MPF is in progress.

 

In the Dialogys - Information Complémentaire (Dialogys - Additional information) , window the message "The program has successfully installed the DIALOGYS application." "You must now install a data CD"

Click on the [Terminer] (Finish) button

 

Note:

If the Dialogys - Information Complémentaire (Dialogys - Additional information) window displays the message: "You do not have enough disk space to install Dialogys". "Please defragment your hard disk to clear some memory space". Click on the Exit button. Then click on the [Terminé] (Finished) button to exit the start-up program, then delete the elements on your disk to clear disk space for Dialogys.

Once the disk space has been cleared re-start the start-up program and perform the previous procedure again.

 

4.      Remove the DIALOGYS 0 CD-Rom from the CD-Rom drive.

5.      Installing the DIALOGYS 1 data CD: insert the DIALOGYS 1 CD-Rom into the CD-Rom drive.


 

6.      From Windows explorer, carry out the following procedure:

 

In the DIALOGYS 1 CD-Rom root file

Double click on the icon: InstallData

On the start-up program home page

Select the required language of the installation

Click on [Ok]

In the Dialogys - Information (Dialogys - Information) window

Click on the [Next] button

In the Dialogys - Sélection du dossier d'installation (Dialogys - Select installation file) window

To change the installation file, click on the [Parcourir] (Browse) button and select the new installation file

Click on the [Next] button

In the Dialogys - Sélectionnez un type d’installation (Dialogys - Select installation type) window

Select the type of installation: Standard or Minimum

Click on the [Next] button

Installation is in progress.

 

In the Dialogys - Information Complémentaire (Dialogys - Additional information), window with the message:  "The data has been successfully installed. Correct consultation".

Click on the [Terminer] (Finish) button

 

7.      Remove the DIALOGYS 1 CD-Rom from the CD-Rom drive.

8.      Insert the DIALOGYS 2 CD-Rom into the CD-Rom drive.

9.      From Windows explorer, carry out the following procedure:

 

In the DIALOGYS 2 CD-Rom root file

Double click on the icon: InstallData

In the Dialogys - Information (Dialogys - Information) window

Click on the [Next] button

In the Dialogys - Sélectionnez un type d`installation (Dialogys - Select installation type) window

Select the type of installation: Standard or Minimum

Click on the [Next] button

Installation is in progress.

 

In the Dialogys - Information Complémentaire (Dialogys - Additional information), window with the message: "The data has been successfully installed." "Consultation OK".

Click on the [Finish] button

Installation is complete. It is ESSENTIAL to restart your workstation

 

10.  Restart your machine.


Procedure for unistalling a program

 

During the installation procedure, a fault may occur and stop installation. If this happens, it is necessary to delete the files which were copied at the beginning of the installation procedure.

 

Uninstalling the basic applications:

In the Windows "Start" menu, select "Settings" then "control panel", then carry out the following procedure:

 

Window

Action

In the Panneau de configuration (Control panel) window

Click on the icon: Add/Remove programs

In the Propriétés de Ajout/Suppression de programs (Properties of Add/Remove programs) window

Select the program to be deleted and

click on the [Ajouter/Supprimer (Add/Remove) button

To remove Acrobat Reader, the Confirmation de suppression des fichiers (Confirm deletion of files) window displays

Click on the [Oui](Yes) button

To remove Quick Time, the Désinstallation Quick Time (Uninstall Quick Time) window displays

Click on the [Tout désinstaller](Uninstall all programs) button

Then the «Désinstaller» (Uninstall) window

Click on the [OK] button

To remove the Java 2 operating environment, the Java 2 RunTime Environment window, SE v1.3.1_04-Welcome to the maintenance system is displayed

Click on the [Next] button

Then the Java 2 RunTime Environment, SE v1.3.1_04-Maintenance window is displayed

Click on the [Next] button

And finally, the Java 2 RunTime Environment, SE v1.3.1_04-Supprimer window is displayed

Click on the [Supprimer] (Delete) button

In all cases, if the message " Uninstallation successful " is displayed, click on the [OK] button

 

Uninstalling the MPF:

In the windows "Start" menu, select the "Program" menu, then the "Dialogys MPF" menu, and click on the " uninstall Dialogys MPF" application. The uninstall application runs, click on the [OK] button to uninstall or the [Annuler] (Cancel) button to exit the uninstall program.

 


Procedure for checking installation

 

Acrobat Reader

-         Start the Acrobat Reader application either:

-         by the Acrobat Reader 5.1 icon on the screen;

-         or through the "Start" menu, "Programs", select the Acrobat Reader 5.1 application;

-         When the application is first opened, in the «Contrat de licence du logiciel»  (Software licence agreement) window, click on the « Accepter » (Accept) button.

-         The application should start.

 

Java Run Time

In a DOS window, enter the command:

java -version

 

The following should be displayed:

java version "1.3.1_04"

java(TM) 2 Runtime Environment Standard Edition (build 1.3.1_04-b02)

java Hotspot(TM) Client VM (build 1.3.1_04-b02, mixed mode)

 

Quick Time

-         Start the Quick Time Player application either:

-         by clicking on the Quick Time Player icon on the screen;

-         or through the "Start" menu, "Programs", "Quick Time" select the Quick Time Player application;

-         The application should start.